| Effective
on a wide selection of odors found in:
- Schools
- Airports
- Shopping Centers
- Commercial Buildings
- Hospitals/Health
Care Facilities
- Hotels
- Manufacturing
Facilities
Economical
solution for many odor problems
Long-lasting odor
removal protection
Easy to install
Interchangeable
with most standard air filters
Disposable
MEDIA PADS
Techsorb
media pads replace any existing 1" media pads and fit most
conventional frames. They can be used in conjunction with
particulate filters to provide odor removal capabilities to
any HVAC system. |
ODOR
REMOVAL FOR IMPROVED INDOOR AIR QUALITY
A filter's effectiveness for odor control
depends directly on the density of activated carbon contained
in the product. Techsorb panels and pads
contain several times more carbon than other impregnated carbon
filters, resulting in a more effective filter.
A true test of a carbon filter is how
long it will last and how effective it will be. Techsorb
panels and pads will provide protection longer and be more
effective in removing unwanted odors within an occupied space.
SIMPLE,
ECONOMICAL CHANGEOVERS
There is no need for expensive retrofits
to accommodate Techsorb panels and pads.
Install the filter the same way you would normally install
any standard filter and dispose of them in the same manner
when they are no longer effective.
|
PANEL
FILTERS
Techsorb
panel filters are interchangeable with standard 1" and 2"
air filters. Enjoy particulate and odor removal in a single
filter product.
THREE-STAGE
PANEL FILTER
 Pre-filter
Activated
Carbon
Final
Filter
A polyester media
pad retains particulate and prevents the carbon pores from
being clogged with dirt.
The carbon media
is installed between the pre-filter and the final filter media.
As the air passes through the carbon, it removes odors and
gases. The slower the air flow through the media the more
effective the carbon will be.
The final dusting
filter stage is placed behind the carbon media to prevent
any carbon dust from entering the air handling system. |
Techsorb
panels and pads have several times more carbon content
and therefore have a higher odor/gas capacity than
other odor removal filters. A built in pre filter
ensures that the expensive carbon media does not get
plugged due to particulate contamination. A final
dusting layer ensures that the carbon media does not
"dust off" preventing any system contamination. Each
Techsorb panel is encased in a heavy
moisture resistant die cut framing material and supported
downstream by a heavy gauge bird screen.
